We offer a wide variety of hardware - everything from vandal-resistant bolts and nuts to the most basic of hardware used to mount a stop sign on a u-channel post. We also carry hardware for square posts, as well as strapping, clips, and buckles.
  • Vandal-Resistant
    Hardware
  • Standard Sign
    Hardware
  • Square Post
    Hardware & Rivets
  • Strapping, Clips
    and Buckles

Vandal-Resistant Bolts

TPA Bolts
Vandal-resistant, truss-headed, un-slotted carriage bolts. Zinc-plated steel with serrated under-carriage. use the NTPAFN fluted nut withh the #T2 installation tool, or the NBA breakaway nut with a wrench.

010-038500

TPA2516 - 5/16" x 2"
010-040000 TPA3516 - 5/16" x 2 1/2"
010-040500 TPA4516 - 5/16" x 3"

One Way Bolts
Zinc-plated steel head of bolt cut away for one way tightening only with straight edge screw driver. Use the NTPANF fluted nut with the #T2 installation tool, or the NBA breakaway nut with a wrench.

010-036500

BOW2 - 5/16" x 2"
010-037000 BOW25 - 5/16" x 2 1/2"
 

Vandal-Resistant Nuts

010-051500

NTPAFN - 5/16" Aluminum Fluted Nut
Requires #T2 installation tool.

010-019500 T2 Tool (not pictured)
For use with aluminum NTPAFN tamper-resistant fluted nut.
010-051000 5/16" Zinc Plated Steel Tufnut®
Requires a standard wrench for installation. First nut has small part of cone facing away from post pyramid fashion. Simply tighten this Tufnut® down by hand. Add a second Tufnut® with the small part of the cone down - small parts are back-to-back. Tighten with wrench, remove second nut, leaivng the first nut tight and secure. Deters thieves from stealing your signs.
010-047000 NBA - 5/16" Aluminum Break-a-Way Nut
Requires a standard wrench for installation. When nut is tight, keep twisting firmly to break off hex head.
 

Vandal-Resistant Bolts & Set Screws

010-036000

BHP76 - 5/16" x 3/4" Button Head
Vandal-resistant bolt. Zinc plated steel 5/32" socket with center pin. Requires a number F100 or number T100 installation tool.

010-041500 VPA12 - 5/16" x 1/2"
Vandal-resistant aluminum bolt. Requires a number T43 installation tool.
010-020000 T43 Tool (not pictured)
Works with the VPA12 aluminum vandal-resistant bolt.
010-052500 PRP38 - 5/16" x 3/8"
Zinc-plated steel standard cup point 5/32" vandal-resistant socket set screw with center pin. Requires a number F100 or number T100 installation tool.

Zinc Plated Steel Hex Head Bolts

010-034500

BH558 - 5/16" x 5/8" Hex Head
010-031500 BH5134 - 5/16" x 1 3/4" Hex Head
010-032000 BH52 - 5/16" x 2" Hex Head
010-032500 BH525 - 5/16" x 2 1/2" Hex Head
010-033000 BH53 - 5/16" x 3" Hex Head
 

Zinc Plated Steel Nuts

010-047500

5/16" Plated Steel Hex Nuts
010-050000 5/16" - 18 Lock Nut with plastic Nylok™ insert. (not pictured)
 

Washers

010-055500

5/16" Flat Zinc Plated Steel

010-053500 5/16" Lock Washer
010-055000 3/8" Nylon Washer
Install nylon washers in front, on face of sign to protect the reflective finish and keep the bolt head away from the sign face.
 

Set Screws

010-052000

5/16" SK56
Standard zinc plated steel - knurled with 5/32" socket.
010-053000 5/16" SSK56 (not pictured)
Stainless steel with 5/32" socket.
 

Installation Tools

010-018500

F-100 - Allen Wrench Tool
Works with standard set screws having a 5/32" socket. Also works with PRP38 set screws & BHP76 button head vandal-resistant bolt. FREE F-100 tool provided with every bracket using the standard SK56 hardware or PRP38 (when standard).

010-019000 T100 - Allen Wrench Tool
Works with standard set screws having a 5/32" socket, with or without center pin. Also works with PRP38 set screws & BHP76 button head vandal-resistant bolt. Plastic handle design not available.

Corner Bolts and Nuts

010-043100

5/16" Corner Bolt (Small)
Attaches square posts together for a breakaway assembly. Use with
1 1/2", 1 3/4", or 2" square posts.
010-043110 5/16" Corner Bolt (Medium)
Attaches square posts together for a breakaway assembly. Use with
1 1/2", 1 3/4" or 2" square posts.
  010-048100 5/16" Jam Nut (not pictured)
For use with corner bolt on square post assembly.
 

Aluminum Sleeve & Mandrel Rivets

Sold as a 2-piece (blind rivet-nail & tubular component-barrel) fastening device.
010-05500 #18 Rivet (1 3/16" long)
For delineator posts. Grip range: 7/8" to 1 1/8". Component length: .820.
010-046000 #26 Rivet (1 5/16" long)
For 2# u-channel posts. Grip range: 1 3/8" to 1 5/8". Component length: 1.320.
010-044000 #34 Rivet ( 1 13/16" long)
For 3# and 4# u-channel posts; Also used to tack together the ends of street name blades, back to back installation on a square post. Grip range: 1 7/8" to 2 18". Component Length: 1.820.
 

Drive Rivets

010-044500

3/8" Aluminum Drive Rivets
Attaches sign to square post. 3/4" round head. Uses a standard hammer for installation.
010-021500 Rivet Gun (not pictured)

Strapping

010-027000

SS36 - 36" Strap (not pictured)
3/4" W x .020" thick stainless steel strapping. Precut straps 36".

012-001000

Snap Lock Assembly
Radiator like clamp for sign mounting. Needs only a screwdriver to tighten. 9/16" x 40" strap length. Other sizes available.
010-027270 C206 3/4" Strapping (not pictured)
3/4" x .030" x 100' Stainless.
 

Clips and Buckles

010-024000

C156 - 06SS Wing Seal
Seals, binds and holds stainless steel 3/4" wing strapping.
010-027010 C154 Value Clip 1/2" (not pictured)
Seals, binds and holds stainless steel strapping.
010-024200 C256 Buckles 3/4" (not pictured)
Stainless buckles are designed to accomodate both single and double wrap clamps. The unique teeth and ears provide for maximum clamping strength.
 

Strapping Tools

010-025000

C-1 Strap Cutter
010-025550 C085 - Bantam Strapping Tool (not pictured)
Light duty applications on flat surfaces with minimal access. Quick take-up and tensioning, self-contained, no extra tools to complete clamp. 2-hands.
  C001 - Standard Strapping Tool
Forged with tensioning capability of over 2,400 pounds & built-in cutter. Apply bands, buckles, strapping and clamps.
  P-1 - Heavy Duty Strapping Tool
Heavy duty windless ratchet tensioner. 3/8" - 3/4" strapping to .030 thickness. Cutter & hammer for wing seal closing.